Firmware changelog of ADM007 tracking device: 0x27 - 23.12.2022 1. Added: operator black list functionality (OPSBLACKLIST0/OPSBLACKLIST1 commands). 2. Added: the number of parameters transmitted via the EGTS protocol has been expanded. 3. Fixed: the problem of inability to connect to the terminal through the remote configurator after changing the password through the server. ! The number of whitelisted operators (OPSWHITELIST0/OPSWHITELIST1 commands) has been reduced from 10 to 7. 0x26 - 24.10.2022 1. Added: WHERE command (in response to it, a link to Yandex.Maps with the current device coordinates is sent). 2. Added: the ability to activate additional confirmation of points sent to the server - the REPLY command. 3. Fixed: Issues when using the SERIAL 1 setting. 0x12 - 23.08.2019 1.Added: detection of jamming of a satellite signal. 2.Revised: GPRS traffic consumption optimization. 3.Revised: settings of the track building mechanism are expanded. 0x11 - 25.03.2019 1.Fixed: in some cases, the longitude was incorrectly displayed (the problem appeared in the 0x10 version). 0x10 - 25.02.2019 1.Revised: quality of navigational performance of trackers is improved. 2.Fixed: lack of opportunity to connect to Windows and Android Configurators as a result of changing a device name. 0x0F - 31.10.2018 1.Added: functionality of the selection of appropriate data blocks for a server transmitting with "PROTOCOL" command. 2.Added: functionality of "Beacon mode" is realized. Tracking records generate only according to a specified time period. 3.Revised: GPS/GNSS module configuration is changed because of the launching of QZSS. 4.Revised: server connection algorithm is changed. Errors appear with some SIM-cards are eliminated. 5.Revised: general device working state stability is increased. 0x0E - 20.06.2018 1.Added: data transmission type according to the EGTS protocol. 2.Added: tracker can be binded to a specific SIM-card. 3.Revised: optimization of the mechanism of time synchronization through GPRS. 0x0D - 27.04.2018 1.Added: time obtaining through GPRS. Creation of tracking records as well as their uploading could be conducted without GPS/GNSS satellites signal. 2.Revised: optimization of cellular network registration and server connection mechanisms. 0x0C - 11.01.2018 1.Added: tracker Bluetooth-invisibility mode. 2.Added: transmitting of MMC and MNC codes of cellphone operator to a server. 3.Added: transmitting of a signal level of a cellular network to a server. 4.Added: cellphone operators whitelist. 5.Added: debug-mode function in ADM Configurator(Windows-version). 6.Revised: general tracker working state and severer connection maintenance stability are increased. 7.Revised: fixed minor errors appear while working with ADM Configurator. 8.Revised: options to change track building parameters are added. 0x0B - 07.11.2017 1.Added: Bluetooth-headsets for voice calls are supported. 2.Added: phone numbers list for voice calls. 3.Added: extra record appears every time analog input discrete station changes. 4.Revised: mechanism of coordinate fixation according to speed limitations is reworked. Coordinates fluctuation during the parking is decreased. 5.Revised: PC connection via Bluetooth-adapter version 2.1 and lower is supported. 6.Revised: track building mechanism is changed. 0x0A - 26.09.2017 1.Revised: to provide an opportunity to view a list of authorized phone numbers "PHONES" command is added. 2.Revised: answer "not authorized" as a result of receiving of SMS-commands, sent from unauthorized phone numbers is disabled. Tracker ignore incoming SMS from unauthorized numbers. 3.Fixed: altitude value was not sent on a server. 0x09 - 09.08.2017 1.Added: CCID and ICCID commands for receiving of identificator of an installed SIM-card. 2.Revised: authorization mechanism (password allowing to have access to tracker settings) now work the same way as in ADM50/100/300/700. 3.Revised: added a mechanism for processing confirmations of package delivery to a server of unexpected format (increased compatibility with some servers). 4.Fixed: APN parameters of a cellphone operator could not be applied if there were no login or password.